Ricoh AP306 - Manual (Page 87)

Replacing Consumables
75
4
E
Loosen the screws that hold the
photoconductor unit in the print-
er with the screw driver in the
new photoconductor unit's box.
The screws cannot be completely
removed from the photoconductor
unit.
F
Holding the green inset grips of
the photoconductor unit, pull the
top of the unit forward.
G
Holding the green inset grips of
the photoconductor unit, remove
the unit from the printer, and
place it carefully inside the new
photoconductor unit's box.
Important
❒ To prevent accidental scattering
of toner, do not shake, rotate,
drop or hold the toner cartridge
upside down.
Note
❒ Do not close the front cover re-
moving the photoconductor
unit. Otherwise, you cannot re-
place the photoconductor unit
because the photoconductor
unit holder will be closed. If you
do this by mistake, return the
photoconductor unit holder to
its original position before re-
placing the photoconductor
unit.
TFWX401E
TFWX250E
TYWX290E
TFWX520E
TFWX300E