Ricoh AP306 - Manual (Page 75)

Removing Misfed Paper
63
4
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
E
Close paper exit cover 2 and paper
exit cover 1.
F
Close the front cover.
When the Message "Remove
Misfeed Duplex Base Unit"
Appears
R CAUTION:
A
Slide out the duplex tray.
B
Open the guide in the duplex tray
as shown in the illustration, and
then remove the misfed paper.
C
While opening the guide in step
B, open the two guides as shown
in the illustration.
D
Remove the misfed paper under
the guide while closing towards
you as shown in the illustration.
E
Close the guides opened in steps
B and C.
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
ZBGY080E
ZBGY020E
ZBGY030E
ZBGY031E
ZBGY032E