Ricoh AP306 - Manual (Page 91)

Replacing Consumables
79
4
R WARNING:
R CAUTION:
Note
❒ Before removing the waste toner
bottle from the printer, spread pa-
per or some other material around
the area you are working to keep
toner from making floor dirty.
A
Turn off the printer’s power
switch.
B
Push the front cover release but-
ton and open the front cover.
C
Holding the green inset grips of
the photoconductor unit, pull the
top of the unit forward.
D
Replace the waste toner bottle.
A Grasping the waste toner bot-
tle by its green tabs, remove it
from the printer.
B Insert a new waste toner bottle
at the rear of the photoconduc-
tor unit.
Insert a new waste toner bottle
completely. Otherwise, print
problem may occur.
• Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
• Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
• If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
• When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E
TFWX330E
TFWX340E