Ricoh AP306 - Manual (Page 73)

Removing Misfed Paper
61
4
A Remove the misfed paper from
inside of the printer.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
When you cannot see the misfed
paper inside the printer
A Remove the misfed paper from
the output tray.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
D
Close the paper exit cover.
E
Close the front cover.
Duplex printer
R CAUTION:
Important
❒ Symbols R mean a situation that
requires you take care.
❒ Symbols v mean “Hot surface”.
A
Push the paper exit cover release
button and open paper exit cover 1.
Note
❒ When opening paper exit cover
1, be careful as it may be hot.
TFWX220E
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
TEWX240E
ZBGY010E