Toshiba RAS-10SKV-A - Manual (Page 47)

– 46 –
9-4-3. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the button.
1. Transmission mark
This transmission mark indicates when the
remote controller transmits signals to the indoor
unit.
2. Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control,
: Cool, : Dry, : Heat)
3. Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
5. TIMER and clock time indicator
The time setting for timer operation or the clock
time is indicated.
The current time is always indicated except
during TIMER operation.
6. Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
7. (PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pressed during operation.
The mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
8. ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
9. A, B change indicator remote controller
When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)
Indicates when comfort sleep is activaled.
Press comfort sleep button to selectter
Indicates when quiet is activated.
Press quiet button to start and press it again to stop
operation.
Indicates when one touch comfort is activated.
Press one-touch button to start the operation.
Indicates when louver is swing.
Press swing button to start the swing operation
and press it again to stop the swing operation.
10. Comfort sleep
1
7
9
12
4
8
6
3
11
10
2
13
5
4. FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW + , MED , MED + ,
HIGH ) can be shown.
Indicates AUTO when the operating mode is
either AUTO or
: Dry.
11. Quiet
12. One-Touch
13. Swing
FILE NO. SVM-07008