Vax M-9000 - Manual (Page 137)

137
24.7. Optional Accessories
24.7.1. AN-9001
24.7.2. ZM-9001
24.7.3. ZM-9002
2-core twisted pair cables
Under 100
Ω (loop)
M3 screw terminal, distance between barriers: 7.62 mm
–10 to +40°C
Surface-treated steel plate, white, paint
72 (w) x 127 (h) x 45 (d) mm
170 g
Applicable Cable
Line Resistance
Terminal
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Machine screw (for box mounting) No.6-32UNC x 30 .............. 2
Machine screw (for panel mounting) No.6-32UNC x 6 ............. 2
2-core twisted pair cables
Under 100
Ω (loop)
M3 screw terminal, distance between barriers: 7.62 mm
–10 to +40°C
Surface-treated steel plate, white, paint
72 (w) x 127 (h) x 56 (d) mm
170 g
Applicable Cable
Line Resistance
Terminal
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Machine screw (for box mounting) No.6-32UNC x 30 .............. 2
Machine screw (for panel mounting) No.6-32UNC x 6 ............. 2
Electret condenser microphone
14 – 26 V DC
7 mA (at 24 V DC)
Omnidirectional (hemispherical)
200
Ω
–5 dB (1 kHz, 0 dB = 1 V/Pa)
100 – 10,000 Hz
Removable terminal block (3 pins)
–10 to +40°C
Panel: ABS resin, white
Frame, Case: Surface-treated steel plate
ø130 x 37 (d) mm
170 g
Type
Phantom Power
Current Consumption
Directivity
Impedance
Rated Sensitivity
Frequency Response
Output Terminal
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Removable terminal plug (3 pins) .................... 1
Machine screw No. 6-32 UNC x 30 .................. 2
Machine screw M4 x 30 ................................... 2