Vax M-9000 - Manual (Page 70)

70
C - I N 0 1 – V O L U P 0 5 . C - I N 0 1 – V O L D O W N 0 5 .
(E8) Volume increasing level setting (E9) Volume decreasing level setting
(E10)
(When the control input function is set to CH ON)
C - I N 0 1 – C H O N
Assign the function to turn on the designated input or output channel to the control input terminal.
Closing the set control input terminal turns on the designated input or output channel.
Assigning a function to this terminal overwrites the previously set function on it if there is.
[When the function is set to CH ON]
(E11) Input/Output channel number selection
C - I N 0 1 – C H O N I N 1
Select with the input or output channel selection key the input or output channel to turn ON.
One control input can turn on one input or output channel.
Set the volume level (dB) to increase or decrease.
0.5 – 10.0 dB (default: 0.5) Setting Range
IN1 – 8, OUT1 – 2, Max. OUT8 when T-001Ts are used (default: IN1) Setting Range
(E12)
(When the control input function is set to CHMUTE)
C - I N 0 1 – C H M U T E
Assign the function that mutes the input or output channel to the control input.
Closing the control input terminal mutes the set channel.
Assigning a function to this terminal overwrites the previously set function on it if there is.
[When the function is set to CHMUTE]
Using the Input channel or Output channel selection key, select the channel number for which you want to
change the volume.
One control input can change one input or output channel volume.
You can change the sound volume for a channel even with the channel off, but not adjust it while monitoring
the sound.
IN1 – 8, OUT1 – 2, Max. OUT8 when T-001Ts are used (default: IN1) Setting Range
(E6)
Input/Output channel number selection
(VOLUP)
C - I N 0 1 – V O L U P I N 1 C - I N 0 1 – V O L D O W I N 1
(E7)
Input/Output channel number selection
(VOLDOWN)