Vax M-9000 - Manual (Page 81)

81
10.9.5. Key lock setting operation
S T E R E O L I N K
– – –
– – –
K E Y L O C K U N L O C K E D
K E Y L O C K
K E Y L O C K A L L O F F
K E Y L O C K A L L O N K E Y L O C K I N P U T O F F
K E Y L O C K I N C H 1 O F F
K E Y L O C K L O C K E D
K E Y L O C K A L L _ _ _
K E Y L O C K I N C H 1 O N
UTILITY 1
2
4 ENTER
6
ESC/BACK
6 ESC/BACK
7 MEMORY
PARAMETER
5
-1
5
-2
PARAMETER
Lock status
display screen
3
Keylock
Step 1. Press the Utility key.
The Utility setting screen is displayed.
Step 2. Press the Down shift key until the keylock
screen is displayed.
Step 3. Press the Right shift key.
Lock status is displayed.
Step 4. Press the Enter key.
The all-key lock ON/OFF setting screen is
displayed.
Step 5. Set keys to be locked.
5-1. All-key lock setting
Set "KEYLOCK ALL" function to
ON with the Parameter setting
knob.
5-2. Selected key(s) lock setting
Press the Shift key to display
individual setting screen for each
key, and perform the ON/OFF
setting with the Parameter setting
knob.
You can set each input or output
channel key to ON or OFF by
selecting it on the screen.
Note
The setting flow on the right is an
example for locking the input
channel 1 key.
Step 6. Press the shift key to return to the all-key lock
setting screen after setting completion, then
press the Escape/Back key.
Step 7. Press the Memory key.
The display returns to the input/output setting
screen, making the key lock setting valid.