Vax M-9000 - Manual (Page 35)

35
10.2. Basic Setting Operation
10.2.1. Moving to setting screens
• The normal use state screen appears on the VFD display when the power is turned on in the factory default
setting.
• To select the input channel, use the input channel selection key.
• To select the output channel, use the output channel selection key.
• Pressing the Utility key in the normal use state or at the input or output setting screen changes the display to
the Utility setting screen. To revert back to the normal use state, press the Memory key.
Tip
Pressing the Memory key at any Utility setting screen on the uppermost hierarchy level - any of the screens
you can move to with the Up or Down shift key starting from the stereo link setting screen as illustrated-
reverts the display back to the normal use state screen.
2
INPUT SELECT
– – – I N 2 – I N 2 O N 0 0 . :
– – – O U T 1 – O U T 1 O N 0 0 . :
OUTPUT SEL
UTILITY
MEMORY
S T E R E O L I N K – – –
Utility setting screen Normal use state
MEMORY
MEMORY
MEMORY
S T E R E O L I N K
P A G I N G O F F
– – –
Utility setting screen Normal use state
M E M O R Y