Vax M-9000 - Manual (Page 72)

72
C - I N 0 1 – C - O U T 0 1
(When the interlock output control is set to ON)
(E18) Interlock output terminal setting
[When the function is set to POWER]
(E19)
(When the control input function is set to POWER)
C - I N 0 1 – P O W E R
Assign the power ON or OFF function to the control input terminal.
Closing the set control input turns the power ON, and then opening it turns the power OFF.
Assigning a function to this terminal overwrites the previously set function on it if there is.
This screen is displayed only when the interlock output control setting is set to ON.
Set the control output terminal which is closed in synchronization with the control input of the set number.
Assigning a function to this terminal overwrites the previously set function on it if there is.
C-OUT01 – 04, C-OUT01 – 12 when C-001T is used (default: C-OUT01)
Note: When the interlock output control ON/OFF setting is ON.
Setting Range