Vax M-9000 - Manual (Page 83)

83
10.10.2. Memory setting items
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
L O A D 0 1
(H1) Scene memory recall
Designate the Scene memory bank number to recall.
Pressing the Enter key recalls the designated Scene memory.
After recall completion, the screen displays the Scene memory bank number and the set memory name.
Pressing the Memory key for over 2 seconds at the input or output setting screen displays the Scene memory
setting screen.
To revert the display back to the input or output setting screen, press the Memory key again.
(H2) Scene memory setting
S C E N E S E T T I N G S A V E
(H3) Scene memory save (when SAVE is set)
S A V E 0 1
01 – 32 (default: 01) Setting Range
Set the Scene memory function.
• SAVE: Saves the current settings as a Scene memory.
• ERASE: Erases the Scene memory.
• P-ON:
Sets the Scene memory bank number to be recalled at power-on.
Select the function above and press the Enter key, and the corresponding screen is displayed.
SAVE (default), ERASE, P-ON Setting Range
Designate the memory bank number to save the current settings to.
Pressing the Enter key saves the current settings to the designated memory bank number.
To cancel save execution, press the Escape/Back key.
Parameters that can be saved into the Scene memory bank are as follows:
Input channel parameter: Channel gain, Channel ON/OFF, Output channel assignment, and built-in
modules' inner parameters*
Output channel parameter: Channel gain, Channel ON/OFF, Bass, Treble, Loudness compensation, EQ,
HPF, LPF, Compressor, Delay, and built-in modules' inner parameters*
Paging zone: Paging zones set in the paging setting flow
* Setting items dedicated to the D-001T, ZP-001T, T-001T or AN-001T
01 – 32 (default: 01) Setting Range