P. 43-a13), Operation mode setting, P. 43-a14) – Vax M-9000 User Manual

Page 43: P. 43-a11), Gate threshold level setting, P. 43-a12), P. 43-a15)

Advertising
background image

43

G A T E T H R E S H O L D

– 3 0

(When the D-001T is used and the gate function is ON)
(A12) Gate threshold level setting

Set the input sensitivity to activate the gate function (

p. 26

).

–40 to –5 dB (default: –30 dB), 5 dB steps

Setting Range

P R E P A G E T O N E –

O F F

(A13) Pre-paging tone ON/OFF setting (when the ZP-001T is used)

Set whether or not to sound a one-tone chime before paging.

When set to OFF, the tone does not sound at the paging telephone, either.

ON, OFF (default)

Setting Range

(A14) Operation mode setting (when the ZP-001T is used)

M O D E =

P A G I N G P O R T

Select the method of activating paging.

• PAGING PORT: Paging is operated if a start signal (no-voltage make signal) is received from the paging

port when the connection between the unit and PABX is established.

• RING SIGNAL:

Paging is operated if an IR signal is received when the connection between the unit and
PABX is established. The ZP-001T module functions as a telephone.

PAGING PORT (default), RING SIGNAL

Setting Range

A N C

A C T I V E

(A15) ANC operation ON/OFF setting (when the AN-001T is used and ANC operation is set to ACTIVE)

Set the ANC operation (

p. 26

) on or off.

• ACTIVE: Activates the ANC function.

• BYPASS: ANC function does not work.

ACTIVE, BYPASS (default)

Setting Range

I N 1 – G A T E –

O N

(A11) Gate ON/OFF setting (when the D-001T is used)

Set the gate function (

p. 26

) to ON or OFF.

• ON: Activates the gate function.

• OFF: The gate function does not work.

ON, OFF (default)

Setting Range

Advertising