Caution – Xantrex Technology MS2000 User Manual

Page 10

Advertising
background image

Safety

viii

975-0125-02-01

capacitors remain charged after all power is disconnected. For instructions on
obtaining service, see the “Warranty and Product Information” section in the
MS2000 Sine Wave Inverter/Charger Operation Guide.

7.

Do not expose the inverter/charger to rain, snow, or splashing bilge water.

8.

To reduce risk of electric shock, disconnect all sources of AC and DC power
from the inverter/charger attempting any maintenance or cleaning. Turning
off controls will not reduce this risk.

9.

The inverter/charger must be provided with equipment grounding conductors
connected to the AC input ground and chassis ground terminals.

To reduce the risk of overheating, keep the ventilation openings clear and do not
install the inverter/charger in a compartment with limited airflow or inadequate
clearances around the unit. Refer to the

MS2000 Sine Wave Inverter/Charger

Installation Guide

for required clearance.

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or
other equipment.

Advertising