Xantrex Technology MS2000 - Manual (Page 33)

Operation
975-0125-02-01 2–3
Using the System Control Panel
The System Control Panel has important features which you’ll want to be familiar
with, as shown in Figure 2-1.
Display screen System information is shown on the display screen with an adjustable backlight.
Indicator lights Four indicator lights on the front panel indicate the operating status of the Xanbus
system.
Push buttons Four push buttons allow you to select device menus and change or display
settings. The red System button toggles the System Control Panel and Xanbus-
enabled devices between Operate mode and Power Save mode. For more
information on the different system modes, see “System Modes” on page 2–6.
Figure 2-1 System Control Panel
Table 2-1 System Control Panel Features and Buttons
Feature Description
1 AC In/Charge light indicates that qualified AC is present at
the input of the inverter/charger. When the MS2000 is
connected to a qualified AC source like the utility grid or a
generator, this light on the System Control Panel illuminates.
2 Inverter On light illuminates when the MS2000 is enabled
(turned on).
3 Low Battery light illuminates when the house battery voltage
on the MS2000 is low.
4 Fault light indicates a condition that requires user attention
and intervention. The Fault light illuminates when any
Xanbus-enabled device connected to the network is in fault.
See “Faults and Warnings” on page 4–2 for the definitions of a
fault and warning.
5 Enter button
•
Confirms selection of a menu item.
• Moves you to the next screen.
9
10
5 6 7 8
1
2
3
4
1