Xantrex Technology MS2000 - Manual (Page 32)

Operation
2–2 975-0125-02-01
Operating the MS2000 with the System Control Panel
The System Control Panel (SCP) provides operating, configuration, and
monitoring capability for your Xanbus system.
The System Control Panel:
• Monitors activity throughout your onboard power system.
• Displays the latest information about your inverter/charger, battery voltage
and current level, battery charge output, and generator start and stop activity.
• Displays the settings for each Xanbus-enabled device in the system.
• Enables you to adjust the settings for each Xanbus-enabled device in the
system.
• Preserves all of its settings in non-volatile memory if system power is
interrupted. After power is restored, you don’t have to reconfigure the SCP or
any of the Xanbus-enabled devices connected to it.
This section provides information on operating the MS2000 with the System
Control Panel. Please refer to the System Control Panel Owner’s Guide for
complete information on using the System Control Panel.
Important: Any MS2000 setting changed from the System Control Panel will
be saved if the unit is shut down by selecting Power Save mode, Safe mode or
Hibernate mode. See “System Modes” on page 2–6 for more information about
the different types of modes.