Viewing the system screen, Viewing the select device menu, Figure 3-2 – Xantrex Technology MS2000 User Manual
Page 58: Ms2000 float system screen (example) –4, Figure 3-3, Select device menu –4
Configuration
3–4
975-0125-02-01
Viewing the System Screen
The System screen, as shown in Figure 3-2, is used to monitor system activity.
You cannot select or change any of the information on the System screen. If you
would like to view more detailed information, press Enter to go to the Select
Device menu.
Viewing the Select Device Menu
The Select Device menu is where you can view a list of all the Xanbus-enabled
devices in your power system. The number of items appearing on the Select
Device menu depends on how many devices are installed as part of your system.
To view the Select Device menu:
◆ On the System screen, press Enter.
The Select Device menu appears with MS2000 highlighted.
Figure 3-2 MS2000 Float System Screen (Example)
menu
Figure 3-3 Select Device Menu