Xantrex Technology MS2000 - Manual (Page 39)

Operation
975-0125-02-01 2–9
Putting the System into Safe Mode
When you are installing or removing devices from the Xanbus system, putting the
system into Safe mode prevents unexpected behavior.
To enter Safe mode:
1. On the Select Device menu, use the down arrow button to highlight System.
The cursor on the right of the screen indicates where you are in the menu.
2. Press Enter.
The System Settings menu appears.
3. On the System Settings menu, with Desired Mode highlighted, press Enter.
4. Use the down arrow button to scroll through the other modes to select Safe
mode.
For more information on the different system modes: Operate, Power Save,
and Hibernate see “System Modes” on page 2–6.
Figure 2-5 Select Device Menu
Figure 2-6 System Settings Menu