3Com CommWorks 5210 - Manual (Page 100)

100 A PPENDIX : E RROR M ESSAGES
SNMP Set Failed
Fatal error. This error occurs if the target card is communicating with the
Software Download utility, but does not respond correctly to a SNMP Set
command. The exact SNMP error is displayed.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking the OK
button of the dialog box terminates the utility.
SNMP Get Failed
Fatal error. This error occurs if the target card did not respond to an SNMP Get
request. The exact error is also displayed.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking the OK
button of the dialog box terminates the utility.
Erase ROM time out
Fatal error. This error occurs if the target card’s Flash ROM is not erased within
the specified timeout (600 seconds).
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking the OK
button of the dialog box terminates the utility.
TFTP: <error>
Fatal Error: This is a series of errors that can occur when the Software
Download utility is overwriting the target card’s configuration with the new
code. Such errors include:
■
file not found
■
file already exists
■
no such user
■
time out
■
disk full or allocation exceeded
■
access violation; this could indicate a corrupt or incorrectly named file. This
error occurs if a NAC is pulled out of its slot while the download is taking
place.
■
illegal TFTP transfer ID; this occurs if there is an internal NMC or chassis
error during downloading.
■
undefined error code
■
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking the
OK button of the dialog box terminates the utility.