3Com CommWorks 5210 - Manual (Page 23)

Connecting to Entities 23
To view the entity after the it is connected using IP Telephony Manager:
1 Start IP Telephony Manager.
2 Click File and then click Open from the IP Telephony Manger Console
window.
3 Select the entity from the list.
4 Click OK.
The entity appears in graphical form. When selected, the entity is blue; when
deselected, the entity is black.
Determining
Gatekeeper and Media
Gateway Connectivity
To test Gatekeeper to Media Gateway connectivity, use the following
procedure.
1 Using IP Telephony Manager Console window, select the edge server card.
2 On the menu bar, select Performance and then Performance Monitor.
The Select Entity window appears.
3 Select the entity 3Com Gateway and then click OK.
The Performance window appears.
Figure 1 Performance Window
4 Select Gatekeepers from the Functional Group.
5 Select Current Gatekeeper IP address and click Add. Click OK.
A real time table appears and displays the selected Gateway and the
Gatekeeper to which it is registered. The IP address of the Gatekeeper to
which it is registered also appears.