3Com CommWorks 5210 - Manual (Page 126)

126 A PPENDIX : C OMMAND L INE I NTERFACE
■
Test Modem
■
Test Analog NIC
■
Test Analog Phone Line
■
Restore Analog Phone Line
■
Busy out DS0 - T1 Slot (N) Span (N) Channel (N)
■
Restore DS0 - T1 Slot (N) Span (N) Channel (N)
■
Modem Software Reset
■
Terminate Connection
■
Busy Out Analog Phone Line
-h
Displays the command line parameters and the descriptions of the parameters
and their flags.
-c readcomm
The SNMP read community string.
-C writecomm
The SNMP write community string.
target
An optional parameter that specifies the IP address or hostname of the NMC in
which stations are being configured
If no target is specified, the GUI behaves as if -h was the only parameter
passed.
The format for target is as follows:
< IP-host>:S<s-range>[C<c-range>][,S<s-range>
[C< c-range>]...]
Where:
IP-host
Can be in IP-dot notation, or a host name that is defined in the host database
or \etc\hosts file.