3Com CommWorks 5210 - Manual (Page 62)

62 C HAPTER 3: N AVIGATING AND U SING THE S YSTEM
Figure 37 Auto Response Window
The AutoResponse dialog box contains the following fields and buttons:
■
Selected Targets—This box shows the slot(s) or channel(s) selected in the
chassis display.
■
Event—Click this box to select an event. If you select an event that requires
a descriptor, make sure that you have programmed the descriptor.
■
Response Script Usage %—This indicator shows the percentage of
available script space you have programmed. Each response may take up a
different amount of script space. Monitor this gauge to avoid programming
too many responses to a single event.
■
Available Responses/Response Script—The responses available for the
event appear on the left, and the responses configured for the event appear
on the right. Refer to AutoResponse Editing for information about
configuring the list. When you select a response that has descriptors, a
window of descriptor options appears .
■
Add—Assigns the selected response to an event.
■
Delete—Removes the selected response.
■
Delete All—Removes all the selected responses from the Responses
Configured list.
■
Get—Queries the NMC for the response script associated with the event.
■
Set—Assigns the selected response script to the event.
■
Load From—Displays the Load From Device window.