3Com CommWorks 5210 - Manual (Page 32)

32 C HAPTER 2: C ONFIGURATION
3 Select the event from the Event drop-down list.
4 Select what you want the system to do when the selected event occurs from
the Available Responses list and click Add.
The response is added to the Responses Configured list box.
5 Click OK.
The response scripts are loaded.
Responses can only be added one at a time. Some responses may require
additional information (for example, Delay N. Seconds). For responses that
require additional input (a descriptor), the AutoResponse Parameters window
displays.
Setting Authorized
Stations The chassis Network Management Card (NMC) contains an authorized access
list that lets you limit management capability to specific management stations
on your network. After you have created entries in the authorized access list,
only those management stations can send SNMP requests to that device.
To set up an authorized access list:
1 Open a console window for the device whose authorized access list you want
to change.
2 From the Security menu, select Authorized Stations.
The Authorized Stations window appears.
Figure 5 Authorized Stations Window
3 From the Authorized Stations Add window, click Add.
The Authorized Stations Add dialog box appears.