3Com CommWorks 5210 - Manual (Page 61)

Configuration Menu 61
For example, 0000000010010000 means that DIP switches 8 and 5 are ON
and all others are off.
■
Software Version—Version of software currently installed in the
component's flash RAM.
You can perform the following tasks from this window:
■
Save—Saves the inventory data table to an ASCII text file.
■
Exit—Closes the inventory utility.
■
Print—Prints displayed data to a printer or file either in postscript or ASCII
format. Figure 36 shows the Inventory Print menu.
Figure 36 Inventory Print Menu
The Inventory Print menu contains the following selections:
■
Print Target—Selects whether to print to file or print to a printer.
■
Print Format—Selects whether to print in postscript format or ASCII text
format.
■
Print Command—Postscript output is piped to this command. The
TCM_PRINT_COMMAND system parameter sets the default.
AutoResponse
Submenu
The AutoResponse submenu lets you define what messages need to appear
when an event occurs. Refer to Chapter 2 for more information on how to set
the auto response messages (IP Telephony Manager Chassis Console only).