3Com CommWorks 5210 - Manual (Page 87)

Invocation Errors 87
Error: Too many targets specified
The user specified more than one IP address/slot-channel combination. (There
is more than one white space-separated word in the target list.)
Invalid target name
The target does not specify a valid IP address or host name.
Software Download The following are the Software Download error messages and what they
indicate.
Error: No target specified
The user did not supply at least an IP address or host name on the command
line.
Error: Invalid target format
The target does not specify a valid IP address or host name.
Selected Targets do not match each other
Fatal error. Multiple NACs were selected for software download, but one or
more of the selected NACs is not the same card type. Only the first mismatch is
displayed.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking on the
OK button of the dialog box terminates the utility.
All selected slots are empty
Fatal error. Selected slots do not contain a card.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking on the
OK button of the dialog box terminates the utility.
extension is not ’NAC’
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the specified
SDL file does not have the correct extension (*.nac).
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file.