3Com CommWorks 5210 - Manual (Page 99)

Execution Errors 99
<filename> does not exist
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if you selected a
filename that does not exist.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file.
No Default SDL File for Card Type <type>
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if there are no
SDL/NAC files for the selected card type in the default /$TCMHOME/data/sdl
directory.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file.
<filename> is corrupt
<filename> has a corrupt header marker
<filename> has wrong software type
<filename> has a crc error
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the internal
header or the SDL or NAC file is incorrect.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the Select
Files dialog box and select an uncorrupted SDL or NAC file. If one is not
available, you will have to acquire an uncorrupted version from the
CommWorks BBS or Internet FTP site.
Devices are not ready yet. This could be due to a previously aborted SDL followed by a premature
new SDL. Please try waiting a few minutes or invoking a hardware reset on the affected cards.
Fatal error. This error occurs if the target card is communicating with the
Software Download utility, but is unable to accept a software download.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility automatically terminates. For xtcmsdl, clicking OK of
the dialog box terminates the utility.