3Com CommWorks 5210 - Manual (Page 50)

50 C HAPTER 3: N AVIGATING AND U SING THE S YSTEM
Figure 23 IP Telephony Manager Console Window
The IP Telephony Manager Console window contains a graphical
representation of the Total Control chassis. The view can be changed by the
View menu to see the front or back of the chassis. Select the area of the
chassis on the IP Telephony Manager Console window on which you want the
function to be performed, then select the function from the main menu bar.
In general:
■
Click on LEDs to select individual channels or entities, or the area just
outside the LEDs to select the whole card. For Network Interface Cards
(NICs), click the connectors.
■
The card’s identity appears to the left of the IP Telephony Manager Console
window.
■
To select more than one channel or entity at a time, hold down the Shift
key.
■
You can select only one type of card at a time (for example, you can select
two HiPer DSP Modem cards, but not a HiPer DSP card and some other type
of modem card).
■
To select all the same type of channels or components in a card, use the All
Like Devices setting in the Select drop-down box at the upper right corner
of the IP Telephony Manager Console window.
If a Gatekeeper, SIP Proxy Server, or a Back-end Server was selected:
The IP Telephony Manager Server window appears.