3Com CommWorks 5210 - Manual (Page 91)

Execution Errors 91
Error constructing target specification...hostname no longer valid?
The user was prompted for target slot/channels using the chassis selection
dialog. After targets were selected, the construction of a target failed,
probably because an IP host name could not be found in the hosts database
even though the host name was valid at program initialization. (The host
database has probably been changed or is no longer accessible.)
Target not responding because NMC is in a software download state. Please wait until software
download is completed.
The NMC is being actively downloaded, or a download was initiated and not
finished. It will not respond to SNMP requests until download is completed.
NMC in software download state!
The NMC is being actively downloaded, or a download was initiated and not
finished. It will not respond to SNMP requests until download is completed.
SNMP Get: <error>
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
SNMP Get-Next: <error>
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
SNMP Set: <error>
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
Cannot find device files for NMC version <version>!
IP Telephony Manager is communicating with an NMC version too recent for it.
Contact CommWorks sales personnel for a newer version of IP Telephony
Manager.
This device is not a IP Telephony Chassis. Exiting.
IP Telephony Manager was launched against an SNMP device that was not an
Enterprise Network Hub or Modem Pool.
Missing or invalid card.dat file!
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.