3Com CommWorks 5210 - Manual (Page 96)

96 A PPENDIX : E RROR M ESSAGES
Cancel Execution and exit program?
Issued in a "Yes/No" dialog when user quits from window frame while
command/test is in progress. (GUI, warning only)
Program exit during execution
The command or test program was terminated (e.g., by a signal) while a
command or test was in progress. (Non-GUI, warning only)
IP Telephony Manager
Console
The following are the IP Telephony Manager Console error messages and what
they indicate.
There are other IP Telephony Manager console(s) viewing this chassis from your system. (This is not a
problem as long as you are coordinating your usage with other users.)
A IP Telephony Manager Console has already been opened on the current
system against the given chassis. That console is performing chassis polling
and providing chassis internal status to all IP Telephony Manager applications
at the time they are launched. The IP Telephony Manager Console reporting
this message will poll chassis status independently of the first console, but will
not provide chassis status information to other IP Telephony Manager
applications. (Warning only)
Could not acquire ownership of chassis status file. Launched processes will perform their own
discovery.
This usually means that the user launching the IP Telephony Manager Console
does not have write ownership of the chassis status information file for this
chassis. This can occur if a user such as root opens a IP Telephony Manager
Console and exits it, and other users then launch IP Telephony Manager
Console. (The file can be manually removed in this case; it resides in
/tmp/vfpd.<ip-hex> where <ip-hex is the hexadecimal representation of the IP
address.) (Warning only)
Internal error acquiring chassis status file. Launched processes may perform their own discovery.
An unknown error occurred in trying to update the chassis status information
file for this chassis. (The IP Telephony Manager log may provide more
information.) (Warning only)
<command>: exec failed: <reason>
IP Telephony Manager Console experienced an error when trying to launch a IP
Telephony Manager application. This is printed on the controlling terminal of
the IP Telephony Manager console (the terminal from which IP Telephony
Manager console or its parent was launched).
Tone send/receive The following are the Tone send/receive error messages and what they
indicate.
Invalid slot number: <number>
The target slot is not a NAC slot number.