3Com CommWorks 5210 - Manual (Page 103)

General Syntax 103
For instance, to display Help for the Software Download utility, type the
following command:
tcmsdl -h
[-c readcomm][-C writecomm]
readcomm—read only community string
writecomm—read/write community string
Used to specify the SNMP community strings that have been assigned to the
device. Note that these switches are optional, but can be used to override IP
Telephony Manager’s initialization file settings.
Target
For all utilities, you must specify the IP address or hostname for the device on
which the operation is to be performed. Some utilities require a more specific
target designation that includes slot and channel. T1 cards also allow timeslot
designations for some utilities.
The x command prefix requires only the IP address or hostname, even if the
command calls for specific slots and channels.
The following format is for an unlimited number of targets within the same
device:
IPhost:[ [Srange [Crange[Trange] ] ],
[ [Srange [Crange[Trange] ] ], . . .
where:
Iphost
The IP address or hostname of the target device.
Range
A single integer or a range of integers (for example, 1-4).
: (colon)
Place after the IPhost designation.
, (comma)
Place between slot groups.