Garmin NavTalk Pilot - Manual (Page 126)

112
Section 6
GPS Receiver
Reference
To activate a route:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route List
is displayed, showing all routes stored in memory.
3. Highlight the desired route and press MENU to
display the Route Options.
4. Highlight ‘Activate’ to navigate the route in
sequence and press ENTER.
The Route List also allows you to enter your own 13-
character name for any listed route. By default the name
includes the first and last waypoints in the route.
To enter a custom route name:
1. Follow steps 1 and 2 above to display the Route List.
2. Highlight the desired route and press ENTER to
display the Route Edit Page.
3. Highlight the route name field (top line) and press
ENTER to begin editing.
4. Use the ARROW or phone keypad to enter the
desired name and press ENTER when finished.
When a route is highlighted on the Route List,
additional functions are available from the Route Options.
To display the Route Options, press MENU
(with the Route List displayed).
The following Route Options are available:
New Route— allows you to create a new route, as
described previously.
Activate— allows you to navigate the route in the
same sequence it was originally created, as described
above.
Selecting a GOTO
destination along the
current route will take
you directly to that
waypoint, then
continue with the
remainder of the route.
Activate the route
you wish to use for
navigation.