Garmin NavTalk Pilot - Manual (Page 63)

49
Section 4
Cell Phone
Reference
“Pop-up” menus
appear for each of the
Sound Page fields.
They will require your phone number and ESN number
(found on the NAM page of the setup menu). For
customer service regarding the AirCell NAM call AirCell at
1-888-286-9876.
Setting Sound Functions for the NavTalk Pilot
Cell Phone Features
By scrolling through the Sound Page you can set the
following sound features:
Microphone to Open or Mute during a call, Call Ring
to Ring A, Ring B, Ring C, Ring D, Ring E, or Off, and
Beeps to sound for Message and Key or only Message, or
Key only, or Off for no Beeps.
When Call Ring is Off, a message with beeps indicates
an incoming call. For total silence the ‘Beeps’ must also
be set to Off. The microphone setting cannot be changed
unless there is a call in progress. The microphone can be
muted during a call by holding the QUIT key. The three
volume settings can be set by pressing the ZOOM/
VOLUME keys at the top of the display screen anytime
(with exception of the map page where Zoom is
functional).
If you are using the NavTalk Pilot unit with the
GARMIN Vehicular Adapter (Hands-Free) Kit, you can
adjust the ‘External Mic Gain’ by highlighting that field
and using the ARROW
keypad left/right keys to raise or
lower the gain as required, for both aircraft and auto.
Setting Date and Time
Date and Time are calculated directly from satellite
signals and cannot be changed. The Time and Date
settings are shown on Last Dialed and Missed Calls Lists
and on the GPS Position Page. The current time is
displayed on the Cellular Status Page. Refer to the GPS
Reference Section for time options.
The local time setting
is adjusted on the
Time Tab Page
The ‘External Mic Gain’
feature is used with the
Aircraft and Ground
Vehicular Adapter Kit