Garmin NavTalk Pilot - Manual (Page 131)

117
Section 6
GPS Receiver
Reference
Deactivate— cancels navigation of the route you are
currently using.
Invert— reactivates the current route in reverse order
and navigates from the end waypoint back to the
beginning waypoint.
Insert Wpt— allows you to insert an additional
waypoint into the route, directly in front of the currently
highlighted waypoint in the route. If no route waypoint is
highlighted, this option is not available. See page 114 for
route editing information.
Remove Wpt— removes the currently highlighted
waypoint from the route. If no waypoint is highlighted,
this option is not available. See page 114 for route editing
information.
Review Wpt— allows you to view the Waypoint
Definition Page for the currently highlighted waypoint in
the route. If no route waypoint is highlighted, this option
is not available. See page 92 for waypoint review
information.
Delete Route— allows you to remove the current
route from memory. The waypoints contained in the
route will still appear in memory, but not as part of the
route. See page 113.
Main Menu
The Main Menu provides access to the waypoints,
cities, routes, track logs, trip computer, vertical Nav, E6B,
timers, emergency and setup features of the unit. The Main
Menu can be accessed at any time using the MENU key.
To display the Main Menu from anywhere,
press the MENU key twice.
The 10 menu options are divided into categories by
function: waypoints/cities/routes/track log, trip computer/
vertical navigation/E6B, timers, and emergency/system
setup.
‘Invert’ option reverses the
sequence of waypoints in
the active route.
To delete the active route
from memory, select the
‘Delete Route’ option.
Press MENU twice to
display the Main Menu.