Garmin NavTalk Pilot - Manual (Page 60)

46
Section 4
Cell Phone
Reference
Password Program-
ming for Lock and
Security Passwords
To program Lock and Security Passwords:
1. Highlight the ‘Change Password’ field and press
ENTER. A ‘Change Password’ window will appear.
2. Press ENTER and choose ‘Security’ from the pop up
menu, then cursor to the Security Field.
3. If you are entering a password for the first time,
move to the Security field and enter the security
password (if you haven’t created a security
password enter 1234567).
4. Press ENTER and cursor to the ‘New’ field to enter
your new security password. The password must be
from one to eight characters and entered from the
phone keypad.
5. Press ENTER to move down to the ‘Retype’ field
and re-enter the password. Press ENTER to record.
If the entry numbers, disguised by asterisks
disappears, your password has been changed. If
not, enter again.
6. Repeat this process for the ‘Lock’ password.
7. Press QUIT to return to the security Setup page.
You can program the NavTalk Pilot to lock automati-
cally each time you turn it On. Whenever you encounter
a feature with a Padlock icon you must always enter the
security password to access or change any programming.
To use Auto Lock:
1. In the Security directory highlight the Padlock Icon
in the Auto Lock field and press ENTER to pop up
the security password box. Press ENTER again to
key in the Security Password.
2. Press ENTER to return to the ‘Auto Lock’ field. The
Padlock icon will be open and highlighted. Cursor
to the ‘Auto Lock’ box and press ENTER to activate
the Auto Lock feature.
3. Cursor back to the Padlock icon and press ENTER
to pop up the security password box. Re-enter the
password and press ENTER to return to the Auto
Lock field with the icon in the locked position.
Auto Lock Selected.
Enter Security Password
to secure Auto Lock and
Call Blocking