Garmin NavTalk Pilot User Manual
Page 40
26
Section 2
Getting
Started
Tour
“Pop-Up” Message
Active Route Page
The last of the six main GPS pages is the Active Route
Page. This page shows the GOTO waypoint or each
waypoint of a route, with waypoint name and the course
along each leg (segment) of the route.
When using a route, the current destination is
marked with an arrow on the left-hand side of the screen.
If no destination has been specified using the #/GOTO
key or a route, no waypoints will be listed on the page.
Messages
The NavTalk Pilot uses on-screen messages to alert
you to important information. Whenever a message
appears, press ENTER to acknowledge the message and
return to the previous page you were viewing. Refer to
Appendix D on pages 143-145 for a complete listing of
these messages.
Active Route Page