Garmin NavTalk Pilot - Manual (Page 79)

65
Section 5
Basic GPS
Using the
Simulator
Selecting the Map Page
Press the PAGE
key repeatedly until the Map Page
appears. The Map Page combines digital charting and
Jeppesen data with a number of selectable features. The map
display shows your present position using an airplane icon in
the center of the screen. Map features such as lakes, rivers,
towns, railways, background roads and highways are shown
as well as nearby airports, navaids, airspace boundaries and
user waypoints. The map can be oriented with the top of the
map always pointing north (‘North Up’), oriented along your
desired course (‘Course Up’) or it can automatically rotate to
keep your current direction of travel at the top of the screen
(‘Track Up’). You can use the IN/OUT zoom keys to adjust
the map to the desired scale. The current scale is shown in
the lower left-hand corner of the display.
To change the map scale:
1. Press the zoom IN key to select a smaller map scale
and display a smaller geographic area.
2. Press the zoom OUT key to select a larger map scale
and display a larger geographic area.
Select a five mile scale by pressing the zoom IN or OUT
key repeatedly.
MapSource and Jeppesen databases are selectable as ON,
OFF or Air On/Gnd On. The Air On/Gnd On selection is the
default. When the unit is in the aircraft or automotive cradle
Air On or Gnd On, as appropriate are selected automatically.
For this simulation practice, let’s configure the Source Aviat’n
Data to ON, to display Jepessen data whether the unit is in or
out of the aircraft cradle.
1. To display the Map Page options, press the MENU key.
3. Use the ARROW keypad to highlight MAP SETUP.
Press ENTER.
4. Use the ARROW keypad to highlight the SOURCE tab.
5. Press the down arrow to ‘AVIAT’N DATA’. Press
ENTER.
6. Select ‘ON’.
Map Page with “Track Up”
orientation and 5 NM Scale
Displayed. IN/OUT ZOOM
keys adjust the map scale.
Note the north indicator in
upper-left corner.
Select Aviation Data ON from
the SOURCE tab of the Map
Setup menu for Jepessen data.