Garmin NavTalk Pilot - Manual (Page 54)

40
Section 4
Cell Phone
Reference
To enter a new number in the PhoneBook:
1. Access the PhoneBook page and press MENU to
bring up the PhoneBook Menu.
2. Highlight ‘New PhoneBk #’ and press ENTER, to
bring up the PhoneBook entry page. Press ENTER
to begin entry and then use the phone keypad to
enter the name. The character block moves to the
next position when you pause after entry. Use the 1
key to enter spaces and a comma or the 0 key for
this and other punctuation. Press ENTER when
finished and cursor down to the number field.
3. Enter the phone number using the phone keypad.
This field automatically spaces the dial string. To
quickly remove an entry in either the name or
number field, hold down the left arrow key with the
field highlighted after pressing ENTER. Move to
the Speed Dial field, press ENTER and assign a
Speed Dial number if desired. Then cursor to ‘Done’
and press ENTER to complete the entry.
To remove a name from the PhoneBook:
1. Highlight ‘Delete Number’ and press ENTER. You
will be prompted to confirm the deletion before
pressing ENTER to remove.
2. To clear the PhoneBook of all names, highlight
‘Delete All’ and press ENTER. You will be prompted
to confirm this deletion before pressing ENTER to
remove all names from your directory.
You can use the Spell ‘n Find feature to quickly find a
name in the phonebook without scrolling through the
name lists. Access the PhoneBook, select Menu and
cursor down to ‘Spell N’ Find’. Then spell out the first
part of the name you want to find until it appears on the
display, and press SEND.
You are always prompted
before a deletion is
performed anywhere in
the NavTalk Pilot
Programming.
Name and Phone No.
entry in the PhoneBook