Garmin NavTalk Pilot - Manual (Page 137)

123
Section 6
GPS Receiver
Reference
5. To place an Emergency call, press and hold the red
9 key for two seconds. A “Pop-Up” window will
announce “Emergency Activation in two Seconds”
and place the call after two Seconds have elapsed.
If you release the 9 key within two Seconds the
call is canceled.
If you are programming a security assist number or
number other than 911 you may want to test the
Emergency Activation to insure that you have entered the
correct number. You can activate this feature even when
the phone is locked and you can also manually enter 911
while the unit is locked. The emergency number will not
appear on the Last Dialed Number list to prevent
inadvertent emergency calls.
Emergency calling will override scan options and use
any available system. Therefore, the unit may roam for an
emergency call, even though “HOME” is the only scan
selected.
Setup— provides a group of pages to perform
various system setup functions, including selection of
position format, units of measure, setting various alarms,
configuring the display and backlighting. Each available
page is denoted by a ‘file tab’ that identifies the function
of that page.
To select a Setup option, highlight the file tab
for the desired function and press ENTER.
The information is automatically displayed
when the file tab is highlighted.
The following pages describe in more detail, the
available settings for each Setup file tab item.
Activation Countdown
Message. Release the
9 key to cancel.
The ‘Setup’ option uses
file tabs for quick
selection or review of
unit settings.