Garmin NavTalk Pilot - Manual (Page 56)

42
Section 4
Cell Phone
Reference
To enter new names and numbers on the
Speed Dial Page:
1. Use the PAGE button to acquire the PhoneBook
page. Then press MENU to enter a new name and
number or edit an existing entry.
2. Highlight the desired entry from the PhoneBook and
press ENTER. If entering a new name and number,
press MENU instead of ENTER to bring up a ‘New
PhoneBk#’ display.
3. Enter the name and number and select a position
on the Speed Dial list that is unused, then highlight
‘Done’ and press ENTER. When you select a
position that is already assigned (0 through 8) it will
replace the old selection.
Setting Up NavTalk Pilot Phone Features
Access the Setup pages through the Main Menu by
pressing the Menu button and using the ARROW keypad
to scroll down to Menu Setup. Press ENTER to access
the Setup pages. These pages are selected by tabs at the
top of the screen. Use the right/left arrow keys to scroll
from tab to tab.
There are several conventions for moving from field
to field and making entries in each setup directory.
To setup phone features:
1. Use the ARROW keypad to move up, down and
from side to side to cursor to and highlight a
selected field.
2. Press ENTER to begin data entry, to “Pop Up” a
sub-menu or activate a button or icon.
3. Enter data using the phone keypad to enter
alphanumeric characters or cursor to a selection
from a pop up menu.
4. Press ENTER to store data and programming
selections for each field and then cursor to the next
field.
Start with the first tab page titled, ‘Phone.’
There are only nine
positions on the Speed
Dial List. Be sure to
select an unused position
or a Speed Dial number
you want to overwrite.
Highlight Setup on the
Main Menu. Press
ENTER
to access the
Setup pages.
Speed Dial Assignment