Garmin NavTalk Pilot - Manual (Page 46)

32
Section 3
Basic Phone
Operation
Speed Dialing
The Speed Dial feature allows you to store up to nine
phone numbers from your PhoneBook directory for quick
access for dialing.
1. To access the Speed Dial page, use the PAGE key to
scroll through the pages until you reach Speed Dial.
2. If you know the list number of a name on the page,
press the keypad key with that number for more
than one second to Speed dial from any display on
the NavTalk Pilot.
3. You can also highlight a name and press SEND to
dial in a conventional manner.
Speed Dialing is programmed when you enter a name
and number into the PhoneBook at the New Number
programming page. For information on entering new
numbers, refer to page 42 in the Cellular Phone Reference
section.
Last Dialed
The Last Dialed feature automatically stores up to
nine phone numbers you have previously dialed for quick
access for redialing.
1. To access the Last Dialed page, use the PAGE key to
scroll through the pages until you reach the Last
Dialed Page.
2. Use the ARROW keypad to highlight the name you
want to call again. Beneath each name is the date
and time that you last placed a call to that person.
3. Once you have highlighted the name, press SEND
and the call will be placed, and the date and time
will automatically be updated.
Enter Names into the
PhoneBook Using ‘New
PhoneBk #’. Find a
Name Quickly by Using
‘Spell ‘n Find’
Enter this Number
to Speed Dial from
anywhere on the
NavTalk Pilot