Garmin NavTalk Pilot - Manual (Page 93)

79
Section 6
GPS Receiver
Reference
This feature applies to airports, navaids, user-created
waypoints, roads, lakes, rivers—nearly everything
displayed except route lines and track log data.
When a waypoint name is highlighted, you can
review information about the waypoint, list waypoint
options, or execute a GOTO right from the Map Page.
To select an on-screen airport or navaid with
the panning pointer:
1. Use the ARROW keypad to highlight the desired item.
2. To view additional database information about the
selected item, press ENTER.
3. To exit the information pages, press QUIT.
To GOTO a highlighted waypoint:
1. With the waypoint highlighted, press #/GOTO,
followed by ENTER.
The GOTO function can be used anywhere on the
map. If nothing currently exists at the pointer position, a
new waypoint (called ‘MAP’) will be created at the
location before the GOTO is initiated.
To cancel the pan function and re-center the
map on your position:
1. Press the QUIT key.
Map Page Options
Many features of the unit are menu driven. Each of
the main pages has an options menu, allowing you to
custom tailor the corresponding page to your preferences
and/or select special features which specifically relate to
that page.
To display the Map Page Options:
1. Press MENU with the Map Page displayed.
The following options are available:
Data Fields Off— allows you to select a full-screen
map display. If the data fields are off, ‘Data Fields Off’
appears shaded in light gray, allowing choices of the other
two map display options; two data fields (default) or four
data fields instead.
Use the ARROW keypad
to pan away from your
present position. Place the
pointer over an airport or
navaid and press ENTER
to see more information.
By placing the panning
pointer over an on-
screen waypoint and
pressing #/GOTO, you
won’t have to manually
enter the identifier for
the waypoint.