Garmin NavTalk Pilot - Manual (Page 149)

135
Section 6
GPS Receiver
Reference
To select an input/output format:
1. Highlight the ‘Format’ field and press ENTER.
2. Select the desired setting and press ENTER.
3. If the ‘GARMIN’ format is selected, highlight the
‘Transfer Mode’ field and press ENTER. Select the
desired setting and press ENTER. The ‘Transfer
Mode’ field allows you to specify what information
to request or send to a second unit. The ‘Host’
setting lets you control all data transfer functions
from the second unit or from a PC.
4. If an ‘RTCM’ format is selected, additional fields are
provided to control a GARMIN GBR 21 Beacon
Receiver directly from your unit. You can enter the
beacon frequency and bit rate and the information
will be used to tune the beacon receiver.