Garmin NavTalk Pilot - Manual (Page 127)

113
Section 6
GPS Receiver
Reference
Copy— allows you to copy the selected route to a
new route. The copy function can be used to save a
TracBack route for future use. The copy function is also
useful for duplicating an existing route before making
changes.
To copy a route:
1. Highlight ‘Copy’ and press ENTER.
2. The Route Plan Page will appear for the duplicate
route and the name for the new route will be the
first and last waypoints in the route. If this name is
identical to the original route name or any other
saved route, then a number will be added to the
end of the name to create a unique name.
Delete Route— allows you to remove the selected
route from memory. The waypoints contained in the
route will still appear in memory, but not as part of the
route.
To delete a route from memory:
1. Highlight ‘Delete Route’ and press ENTER. A
confirmation page will appear.
2. Press ENTER to delete the route or QUIT to cancel.
Delete All— allows you to remove all routes from
memory. The waypoints contained in all stored routes
will remain in memory, but not as part of any route.
To delete all routes from memory:
1. Highlight ‘Delete All’ and press ENTER. A
confirmation page will appear.
2. Press ENTER to delete all routes or QUIT to cancel.
Route Editing
Once a route is added to memory, you can review
and/or edit the route from the Route Plan Edit Page. The
Route Plan Edit Page shows the sequence of waypoints for
the selected route and provides additional options to
insert waypoints, remove waypoints or perform trip/fuel
planning functions.
‘Copy’ allows you to
make a duplicate of a
route before making
editing changes.
‘Delete’ will remove the
route from memory,
but not the waypoints
contained in the route.