AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 128)

Services Reserved for Attendants
MD Evolution – Dialog 4223 Professional
128
When your position’s general calls acceptance status is active, this
will also be indicated on your idle extension by the word “enabled”
displayed on the second line of the screen.
If you are the first (or only) attendant who has signed on, the
system automatically changes from night mode to day mode.
On the other hand, to deactivate your attendant position at the end
of your shift, from an idle extension:
Menu Press the Menu key.
GEN_CALL Press the dynamic function key shown on the left.
Your extension prompts you to enter a number for the night call
forward, when applicable.
NIGHT ST NO
z
Dial the desired extension number for the night call forward.
This night call forward number may be an internal number. It may
also be an external number containing no more than 18 digits, must
begin with the ad-hoc network access prefix, and end with “#”.
Or,
NONIGHTST Press the dynamic function key shown on the left if you do
not want to define a night call forward.
In either case, a system message will confirm whether or not
programming was carried out. í
Press the “C” key to end this service.
Your position no longer accepts the facility’s general calls, which is
indicated by the “Inactive” status above the previous “GEN_CALL”
function key.
FRI 20-APR 15:28 AT 2
4 Callers AT 420 enabled
REDIAL CALLERS PICKUP NAME >
Programming
enabled disabled disabled disabled
GEN_CALL GROUP LOCK CALL_FWD >
FRI 20-APR 03:29:00 PM AT 2
ADD A NS ? _
NONIGHTST