AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 42)

Operations during a Call
MD Evolution – Dialog 4223 Professional
42
Call Hold
When you are carrying on a single conversation, you may also
temporarily place the current call on hold, in order to carry out a
non-telephone related task. To do so:
L1
Х Ф
Press the line key corresponding to the current call.
The LED associated with this line begins to flash quickly, and your
party is placed on hold on your extension.
L1
Ц Ф
Press the line key corresponding to the current call once
again, to return to your conversation.
The associated LED is now continuously lit.
Note: There is no time limit on this call hold service.
Call Parking and Parked Call Retrieving
When you are carrying on a single conversation, you may park the
current call, in order to subsequently retrieve it on a different exten-
sion. For example, this would allow you to change offices without
losing your call.
To do so, whether you are carrying on a conversation using the
handset or handsfree mode:
CALL_PARK Press the dynamic function key shown on the left.
Your party is then placed on hold.
ID. CODE
z
Dial the identification code for the call you wish to park.
This call identification code will be requested later when you retrieve
the parked call. This code is unrestricted, and may consist of 1 or
2 digits, according to your facility’s configuration (usually 2 digits).
A confirmation that the service was accepted is provided both
visually and audibly; the “Accepted Service” message is displayed
on the screen, and the service acceptance tone is played.
FRI 20-APR 15:28
L1 SMITH Peter-405
01:33
DTMF INFO_COMM CALL_PARK>
FRI 20-APR 15:28
Parking _
RETURN