AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 52)

Call Forwarding Services
MD Evolution – Dialog 4223 Professional
52
í
Press the C key on your extension to exit the programming
mode.
Call-Fwd
Ц Ф
The variable call forward that you have just defined is effective imme-
diately. This status will cause your extension’s Call-Fwd key to
flash. If you return to your extension’s programming mode, the
“enabled” status is also displayed above “CALL_FWD”.
Notes:
The “BLANK” and “CURSOR+” functions enable you to
delete or modify the number for an existing call forward. The
“RETURN” function enables you to exit the screen without
modifying the content.
Your extension may also be subject to call forwarding from
third party sets. Certain extensions (such as yours) may
possibly be equipped with permanent protection against
receiving call forwards from third party sets. Obviously, this
service will be denied on these extensions (and vice-versa).
Cumulative call forwards between different users are
authorised.
Cancelling a Variable Call Forward
A temporary variable call forward is shown on your extension by a
flashing Call-Fwd key.
To cancel this call forward:
Call-Fwd
Ц Ф
Simply press the Call-Fwd key.
The variable call forward is immediately cancelled.
Call-Fwd
Ô
This change in status will also cause your extension’s Call-Fwd key
LED to turn off. If you return to your extension’s programming
mode, the “disabled” status is also displayed above “CALL_FWD”.
Note: As an alternative, you may also access your exten-
sion’s variable call forward programming, and select the
“CANCEL” option on the third screen. The result will be the
same.