AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 32)

Operations for Outgoing Calls
MD Evolution – Dialog 4223 Professional
32
Once you have finished:
STOP Press the dynamic function key shown on the left to deactivate
the service.
You will then return to normal communication. When applicable,
the number you subsequently dial is again interpreted by your
facility, just as with other service requests.
Note: When you interact with the voice mail system, or the
automated attendant possibly integrated in your facility, the
aforementioned operations are not required. DTMF end-to-
end dialling is automatic. See also the “ Voice Mail Services ”
section.
Ending a Call
You may, at any time, end an ongoing call, or an outgoing call that
is being established.
This is done in the same way as with an incoming call:
d
Replace the handset.
Your extension returns to idle status.
Or, for handsfree mode:
í
Press the key shown on the left to end the call in handsfree
mode.
Your extension returns to idle status.