AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 152)

153 MD Evolution – Dialog 4223 Professional
Your Extension’s Accessories
Installing Add-on Key Panels
You can install your add-on key panel without any particular tools
or accessories.
These panels are connected using a rigid connector designed to
attach the first satellite to the underside of your extension, and
each subsequent satellite to the underside of the previous one.
These modules are held in place by a tulip-shaped pin that is inserted
in the appropriate hole on the underside of your extension or the
previous satellite, as well as the plastic slots located along the edge
of your extension or satellite.
So, to install any satellite, simply follow the directions illustrated in
the following diagram:
•
With your extension upside down, position the new satellite
along the edge of your extension or previous satellite.
• Press firmly on the bottom of the satellite in order to correctly
insert it onto your extension or the previous satellite.
When removing a satellite, press firmly on the top in order to
disconnect the plastic connector and the tulip-shaped pin.
Just as with your extension, each satellite has a support foot that
can be installed and adjusted to one of two positions, according to
the angle you have set for your extension.