AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 54)

Call Forwarding Services
MD Evolution – Dialog 4223 Professional
54
Follow Me or Third Party (or Remote) Call
Forward Service
In the event that you may have forgotten to define your variable call
forward before leaving your extension, you may remotely program it
from any internal extension destined to be the recipient of your call
forwards.
This is the Follow me or Third party (or remote) call forward service
that, assuming the recipient has an extension identical to yours, is
activated as follows, from an idle extension:
Menu Press the Menu key on the third party set.
You then access programming for the third party set.
CALL_FWD Press the dynamic function key shown on the left.
You then access call forward programming.
>> Press the Next key to display the following screen:
REMOTE_FWD Press the dynamic function key shown on the left.
You then access remote call forward programming.
STATION NO
z
Then dial your own extension number.
The third party set displays the following screens:
Programming
disabled enabled disabled disabled
GEN_CALL GROUP LOCK CALL_FWD >
Call fwd
NODISTURB NREP+BUSY REMOTE_FWD SYSTEM >
Station nb to call forward :
_
CONFIRM RETURN
Remote CFW OF 420
IMMEDIATE NO_REPLY BUSY MESSAGE >
Remote CFW OF 420
NODISTURB NREP+BUSY CANCEL <