Remove element, Modify element playback parameters – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual

Page 138

Advertising
background image

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment – March 2008

Issue 4.4.C

125

R

EMOVE

E

LEMENT

To remove a selected element or elements from the play-list, select remove

element from the contextual menu. A confirmation message will be displayed
dependant on the status of the play-list being edited:

If the play-list is off-line:

If the play-list is on-line or on-air:

ON AIR is displayed if the play-list is on air. On-line is displayed if the play-list is
on-line but not on air.

Note

If a group is part of the selection, all elements of the group will be

removed.

M

ODIFY

E

LEMENT

P

LAYBACK

P

ARAMETERS

This group of contextual menus allow the modification of the parameters used
when an element or selection of elements are played in a play-list.
If multiple elements are selected in the list, the values entered will be applied to
all selected elements.

The following sections provide a detailed description of these menu items:

Define Audio/Video Effect’, on page 126

Set Speed’, on page 127

Define Start Mode’, on page 127

Reset transition to default’, on page 129

Advertising