EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 149)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
136
Mute On
When Mute is selected, a popup window is displayed asking for the entry of the
duration for the audio mix used in the transition to mute the audio of the element
at the timecode specified.
When this window is opened, the last value entered is displayed. Limit values are
00s00 to 20s00.
If OK is clicked to validate the operation, the duration entered is displayed in the
description area for the tag.
Mute Off
It returns the Audio of an element from a muted state at the timecode specified
using an audio mix of the value entered in the dialogue box.
When this window is opened, the last value entered is displayed. Limit values are
00s00 to 20s00.
Note
A Mute tag and a Swap Audio tracks tag cannot be defined on the same
T/C. See below for more information.
Swap audio tracks
When Swap Audio Tracks is selected as a tag type, the Swap Audio Tracks
window is displayed. For more information on the Swap Audio Tracks window,
refer to the section “Swap Audio Tracks Window”, on page 136.
S
WAP
A
UDIO
T
RACKS
W
INDOW
When the window opens, the last selection made is displayed. If it does not
correspond to a predefined configuration, “Select a configuration” is displayed.